Share it
bluetooth tag


Bluetooth BLE 5.0 Low Energy indoor positioning card

VDB1608 is a BLE(Bluetooth Low Energy) 5.0 card. It can broadcast its owner’s personal identification information like name and number. And it can be used as indoor positioning card, which can be located by BLE gateway or other BLE locating base-station. VDB1608 can also scan and forward at most 3 other BLE cards/beacons whose broadcasting frame pattern are the same as VDB1608’s. In that way, the covering range of BLE gateway can be extended by card rela.

Read More

VDB1608 has a rechargeable 600mAh Li-Battery.
It can be charged by a magnetic USB connector line. Please follow the magnetic draw direction which will
combine the card and connector tightly. Do not let the battery run out for too long, which may damage the battery, and make it difficult to recharge. VDB1608 has a power key which can also be used as SOS key. Short press can activate the SOS signal, and long press (>3S) can power on or power off the card. VDB1608 has two LED. The red one will be on when the battery is charging. The blue one will be on when pressing the button.

BLE5.0 TX power +8dBm Max
BLE5.0 RX sensitivity -95dBm(1Mbps BLE);-103dBm(125Kbps BLE)
Frequency 2400~2483.5MHz
Battery Life TBD
Power consumption TBD
LED Charging LED, state LED
Key Short press: SOS
Long press: Turn on/off
Broadcasting distance 100 meters
Battery capacity 550mAh
Charging cable Magnetic connect cable
Charging time 4 hours
Program updating Support USB JLINK
Support OTA(Over The Air, by bluetooth updating)
Operating Temp. -20~60℃
IP grade IP67(water resistance)
Dimention 85.33*53.92*7.26mm
Accessory Magnetic connect cable, Hanging belt